Skip to Content

Brine cooler EA-G-163GG4-A19 C

Brine cooler EA-G-163GG4-A19 C
Illustrative photo

Producer: Karyer · Line: EA-G (General)

Product code: EA-G-163GG4-A19 C

Cooling capacity i
31.51 kW
Air flow
11,341 m³/h
Fin spacing
4.6 mm
Air throw
26 m
Fans
1 × ⌀630 mm

Nominal conditions: ethylene glycol 30 % −10 → −7 °C, air inlet 0 °C, relative humidity 85 %

Data

Coil
Air flow 11,341 m³/h
Air throw 26 m
External surface 217.2 m²
Inner volume 46.6 dm³
Fin spacing 4.6 mm
Fin materialAluminium
Net weight 187 kg
Fans
Quantity 1
Diameter 630 mm
Speed 1,330 rpm
Power 1,250 W
Supply 400V/3Ph/50Hz
Motor type AC
Poles 4
Acoustic
Sound pressure 60.0 dB(A)
Sound power 83.0 dB(A)
Energy class E
Connections
Inlet 2"
Outlet 2"
Defrost
EA-G-163GG4-A19 C None

Performance

Fluid -10 → -7 °C

ΔT (air inlet − fluid inlet) must be within 6–12 K (fluid outlet = inlet + 3 K); air inlet -25…10 °C. Points below the fluid's freezing point are not rated.

ETHYLENE GLYCOL 30% -10 → -7 °C, air inlet 0 °C (ΔT 10 K)

Cooling capacity · High speed (Δ)
31.509 kW Sensible capacity 22.594 kW Fluid flow 9.88 m³/h Pressure drop 94.2 kPa above the recommended pressure drop
Cooling capacity · Low speed (Y)
26.440 kW Sensible capacity 18.940 kW Fluid flow 8.29 m³/h Pressure drop 69.0 kPa

Cooling capacity [kW]: Air inlet × ΔT (air − fluid inlet), fluid range 3 K

ETHYLENE GLYCOL 30%; rows: ΔT = air inlet − fluid inlet [K], outlet = inlet + 3 K; columns: air inlet temperature. The highlighted cell is the nominal point. "—": not rated by the manufacturer.

≈ 1.23 estimate — vendor data irregular here

High speed (Δ)

Cooling capacity [kW]: Air inlet × ΔT (air − fluid inlet), fluid range 3 K
ΔT [K] \ air [°C] -25-20-15-10-50510
6 not rated not rated not rated not rated 10.41 ≈ 9.15 ≈ 9.16 ≈ 11.27
8 not rated not rated not rated not rated ≈ 16.63 ≈ 21.22 ≈ 23.01 ≈ 25.52
10 not rated not rated not rated not rated 29.62 31.51 33.75 36.87
12 not rated not rated not rated not rated not rated 40.69 43.76 47.63

Low speed (Y)

Cooling capacity [kW]: Air inlet × ΔT (air − fluid inlet), fluid range 3 K
ΔT [K] \ air [°C] -25-20-15-10-50510
6 not rated not rated not rated not rated 9.49 ≈ 8.36 ≈ 8.20 ≈ 8.16
8 not rated not rated not rated not rated 15.00 ≈ 17.23 ≈ 19.19 ≈ 21.74
10 not rated not rated not rated not rated 24.24 26.44 28.64 31.36
12 not rated not rated not rated not rated not rated 34.26 37.06 40.39

Nominal rating

Nominal conditions: ethylene glycol 30 % −10 → −7 °C, air inlet 0 °C, relative humidity 85 %

Fan connection Cooling capacity [kW] Fluid flow [m³/h] Pressure drop [kPa]
High speed (Δ) 31.509 9.88 94.2
Low speed (Y) 26.440 8.29 69.0

Dimensions

Dimension drawing of EA-G-163GG4-A19 C
Dimension drawing
Dimensions as drawn
A 1715 mm
B 1100 mm
C 1190 mm
F 1060 mm
E 1335 mm
D IN 2"
D OUT 2"
Overall [mm]
Length 1715 mm
Width 1100 mm
Height 1190 mm

Downloads

Ask about product

Our engineers answer with a selection for your conditions.

Thank you. We received your enquiry and will get back to you shortly.

The data are illustrative and may change without notice. Capacities are interpolated from the manufacturer's rating grid; points the manufacturer did not rate are shown as "not rated" and never estimated.

Compare 0 / 4 Open comparison You can compare up to 4 units; remove one before adding another.