EG-G-130AC4-A25 C
1.51 kW
Brine cooler EG-G-225AB4-A23 C
Defrost: None
Product code: EG-G-225AB4-A23 C
- Cooling capacity i
- 1.52 kW
- Air flow
- 1,448 m³/h
- Fin spacing
- 4.2 mm
- Air throw
- 7 m
- Fans
- 2 × ⌀250 mm
Nominal conditions: ethylene glycol 30 % −10 → −7 °C, air inlet 0 °C, relative humidity 85 %
Data
| Air flow | 1,448 m³/h |
|---|---|
| Air throw | 7 m |
| External surface | 8.8 m² |
| Inner volume | 2.1 dm³ |
| Fin spacing | 4.2 mm |
| Fin material | Aluminium |
| Net weight | 25 kg |
| Quantity | 2 |
|---|---|
| Diameter | 250 mm |
| Speed | 1,300 rpm |
| Power | 130 W |
| Supply | 230V/1Ph/50Hz |
| Motor type | AC |
| Poles | 4 |
| Sound pressure | 40.0 dB(A) |
|---|---|
| Sound power | 61.4 dB(A) |
| Energy class | E |
| Inlet | 1 1/4" |
|---|---|
| Outlet | 1 1/4" |
| EG-G-225AB4-A23 C | None |
|---|
Performance
ΔT (air inlet − fluid inlet) must be within 6–12 K (fluid outlet = inlet + 3 K); air inlet -25…10 °C. Points below the fluid's freezing point are not rated.
ETHYLENE GLYCOL 30% -10 → -7 °C, air inlet 0 °C (ΔT 10 K)
- Cooling capacity · Single phase
- 1.518 kW Sensible capacity 1.115 kW Fluid flow 0.48 m³/h Pressure drop 43.8 kPa
Cooling capacity [kW]: Air inlet × ΔT (air − fluid inlet), fluid range 3 K
ETHYLENE GLYCOL 30%; rows: ΔT = air inlet − fluid inlet [K], outlet = inlet + 3 K; columns: air inlet temperature. The highlighted cell is the nominal point. "—": not rated by the manufacturer.
≈ 1.23 estimate — vendor data irregular here
Single phase
| ΔT [K] \ air [°C] | -25 | -20 | -15 | -10 | -5 | 0 | 5 | 10 |
|---|---|---|---|---|---|---|---|---|
| 6 | not rated | not rated | not rated | not rated | 0.69 | 0.61 | 0.62 | ≈ 0.62 |
| 8 | not rated | not rated | not rated | not rated | 1.11 | 1.06 | ≈ 1.04 | ≈ 1.59 |
| 10 | not rated | not rated | not rated | not rated | 1.55 | 1.52 | ≈ 2.19 | ≈ 2.51 |
| 12 | not rated | not rated | not rated | not rated | not rated | 2.61 | 2.98 | 3.33 |
Nominal rating
Nominal conditions: ethylene glycol 30 % −10 → −7 °C, air inlet 0 °C, relative humidity 85 %
| Fan connection | Cooling capacity [kW] | Fluid flow [m³/h] | Pressure drop [kPa] |
|---|---|---|---|
| Single phase | 1.518 | 0.48 | 43.8 |
Dimensions
| A | 1546 mm |
|---|---|
| B | 685 mm |
| C | 245 mm |
| F | 630 mm |
| E1 | 618 mm |
| E | 1235 mm |
| D IN | 1 1/4" |
| D OUT | 1 1/4" |
| Length | 1546 mm |
|---|---|
| Width | 685 mm |
| Height | 245 mm |
Downloads
Ask about product
Our engineers answer with a selection for your conditions.
The data are illustrative and may change without notice. Capacities are interpolated from the manufacturer's rating grid; points the manufacturer did not rate are shown as "not rated" and never estimated.