KT-135AB2-B01 C
4.53 kW
Condenser KT-225CB1-B05 C
Defrost: None
Product code: KT-225CB1-B05 C
- Heat rejection i
- 4.54 kW
- Air flow
- 1,337 m³/h
- Fin spacing
- 2.1 mm
- Fans
- 2 × ⌀250 mm
Nominal conditions (EN 327): air inlet 25 °C, condensing temperature 40 °C (ΔT 15 K), gas inlet superheat 26 K, no subcooling, relative humidity 50 %
Data
| Air flow | 1,337 m³/h |
|---|---|
| External surface | 10.1 m² |
| Inner volume | 0.8 dm³ |
| Fin spacing | 2.1 mm |
| Fin material | Aluminium |
| Net weight | 11 kg |
| Quantity | 2 |
|---|---|
| Diameter | 250 mm |
| Speed | 1,300 rpm |
| Power | 190 W |
| Supply | 230V/1Ph/50Hz |
| Motor type | AC |
| Poles | 4 |
| Sound pressure | 30.0 dB(A) |
|---|---|
| Sound power | 61.5 dB(A) |
| Energy class | E |
| Inlet | Ø12 |
|---|---|
| Outlet | Ø10 |
| KT-225CB1-B05 C | None |
|---|
Performance
ΔT (condensing − air inlet) must be within 8–20 K; air inlet 25…50 °C.
R404A, dew point, air inlet 25 °C, ΔT 15 K (condensing 40 °C); Vendor rating (gas inlet superheat 26 K, no subcooling)
- Heat rejection · Single phase
- 4.599 kW Refrigerant flow 108 kg/h
Heat rejection at ΔT 15 K [kW]
R404A, Vendor rating (gas inlet superheat 26 K, no subcooling); one row per fan connection; columns: air inlet temperature. The highlighted cell is the nominal point. "—": not rated by the manufacturer.
≈ 1.23 estimate — vendor data irregular here
| Fan connection \ air [°C] | 25 | 30 | 35 | 40 | 45 | 50 |
|---|---|---|---|---|---|---|
| Single phase | 4.60 | 4.63 | 4.67 | 4.72 | 4.79 | 4.90 |
Nominal rating
Nominal conditions (EN 327): air inlet 25 °C, condensing temperature 40 °C (ΔT 15 K), gas inlet superheat 26 K, no subcooling, relative humidity 50 %
| Fan connection | Heat rejection [kW] |
|---|---|
| Single phase | 4.599 |
Dimensions
| A | 736 mm |
|---|---|
| B | 270 mm |
| C | 130 mm |
| F | 40 mm |
| G | 50 mm |
| E | 716 mm |
| C1 | 150 mm |
| C2 | 231 mm |
| D IN | Ø12 |
| D OUT | Ø10 |
| Length | 736 mm |
|---|---|
| Width | 231 mm |
| Height | 270 mm |
Downloads
Ask about product
Our engineers answer with a selection for your conditions.
The data are illustrative and may change without notice. Capacities are interpolated from the manufacturer's rating grid; points the manufacturer did not rate are shown as "not rated" and never estimated.