Skip to Content

Brine cooler EA-HL-G-250AG7-A10 C

Brine cooler EA-HL-G-250AG7-A10 C
Illustrative photo

Producer: Karyer · Line: EA-HL-G (High Type)

Product code: EA-HL-G-250AG7-A10 C

Cooling capacity i
31.30 kW
Air flow
14,274 m³/h
Fin spacing
7.0 mm
Air throw
21 m
Fans
2 × ⌀500 mm

Nominal conditions: ethylene glycol 30 % −10 → −7 °C, air inlet 0 °C, relative humidity 85 %

Data

Coil
Air flow 14,274 m³/h
Air throw 21 m
External surface 127.2 m²
Inner volume 45.6 dm³
Fin spacing 7.0 mm
Fin materialAluminium
Net weight 207 kg
Fans
Quantity 2
Diameter 500 mm
Speed 1,360 rpm
Power 1,380 W
Supply 400V/3Ph/50Hz
Motor type AC
Poles 4
Acoustic
Sound pressure 61.0 dB(A)
Sound power 83.0 dB(A)
Energy class E
Connections
Inlet 2"
Outlet 2"
Defrost
EA-HL-G-250AG7-A10 C None

Performance

Fluid -10 → -7 °C

ΔT (air inlet − fluid inlet) must be within 6–12 K (fluid outlet = inlet + 3 K); air inlet -25…10 °C. Points below the fluid's freezing point are not rated.

ETHYLENE GLYCOL 30% -10 → -7 °C, air inlet 0 °C (ΔT 10 K)

Cooling capacity · High speed (Δ)
31.301 kW Sensible capacity 22.551 kW Fluid flow 9.83 m³/h Pressure drop 56.6 kPa
Cooling capacity · Low speed (Y)
21.380 kW Sensible capacity 15.458 kW Fluid flow 6.71 m³/h Pressure drop 28.8 kPa

Cooling capacity [kW]: Air inlet × ΔT (air − fluid inlet), fluid range 3 K

ETHYLENE GLYCOL 30%; rows: ΔT = air inlet − fluid inlet [K], outlet = inlet + 3 K; columns: air inlet temperature. The highlighted cell is the nominal point. "—": not rated by the manufacturer.

≈ 1.23 estimate — vendor data irregular here

High speed (Δ)

Cooling capacity [kW]: Air inlet × ΔT (air − fluid inlet), fluid range 3 K
ΔT [K] \ air [°C] -25-20-15-10-50510
6 not rated not rated not rated not rated 10.94 9.62 9.57 ≈ 9.57
8 not rated not rated not rated not rated 17.45 16.59 ≈ 16.31 ≈ 26.73
10 not rated not rated not rated not rated ≈ 24.04 31.30 ≈ 35.41 39.65
12 not rated not rated not rated not rated not rated 42.03 46.55 51.52

Low speed (Y)

Cooling capacity [kW]: Air inlet × ΔT (air − fluid inlet), fluid range 3 K
ΔT [K] \ air [°C] -25-20-15-10-50510
6 not rated not rated not rated not rated 10.01 8.89 8.63 ≈ 8.60
8 not rated not rated not rated not rated 15.81 15.12 ≈ 14.69 ≈ 22.52
10 not rated not rated not rated not rated 21.63 21.38 ≈ 29.85 33.74
12 not rated not rated not rated not rated not rated 35.04 39.46 43.88

Nominal rating

Nominal conditions: ethylene glycol 30 % −10 → −7 °C, air inlet 0 °C, relative humidity 85 %

Fan connection Cooling capacity [kW] Fluid flow [m³/h] Pressure drop [kPa]
High speed (Δ) 31.301 9.83 56.6
Low speed (Y) 21.380 6.71 28.8

Dimensions

Dimension drawing of EA-HL-G-250AG7-A10 C
Dimension drawing
Dimensions as drawn
A 2387 mm
B 740 mm
C 875 mm
F 660 mm
E1 1018 mm
E 2035 mm
D IN 2"
D OUT 2"
Overall [mm]
Length 2387 mm
Width 740 mm
Height 875 mm

Downloads

Ask about product

Our engineers answer with a selection for your conditions.

Thank you. We received your enquiry and will get back to you shortly.

The data are illustrative and may change without notice. Capacities are interpolated from the manufacturer's rating grid; points the manufacturer did not rate are shown as "not rated" and never estimated.

Compare 0 / 4 Open comparison You can compare up to 4 units; remove one before adding another.